Sharp AL-1651CS Operation Manual page 67

Program
Program name
number
AUTO SHUT-OFF
4
TIME
STREAM FEEDING 1: ON
5
6 LAYOUT IN 2IN1
OFFSET
7
FUNCTION
ROTATE ORIG.
8
IMAGE
Setting codes
(factory default
setting appears
in bold)
• This function automatically
switches the machine to a state
that consumes even less power
than preheat mode if the set
duration of time elapses without
the machine being used when
the power is on. All lights
1: 5 MIN.
except the power save indicator
2: 30 MIN.
go off. To resume normal
3: 60 MIN.
operation, press the [START]
4: 120 MIN.
key (
5: 240 MIN.
also resumes automatically
when a print job is received or
scanning is begun from a
computer. While in auto power
shut-off mode, no keys (except
the [START] key (
used.
• When copying using the
RSPF, while "SET
ORIGINALS FOR STREAM
FEEDING." appears in the
display after an original has
2: OFF
been scanned (about 5
seconds), a subsequent
original can be placed and
automatically fed into the
machine.
• Use this setting to select the
layout pattern when two
original pages are copied onto
1: PATTERN 1
2: PATTERN 2
a single sheet of paper (see
page 35 for the layout
patterns).
• When enabled, this function
offsets the position in the
paper output tray of sets of
1: ON
2: OFF
copies during sort copy or
copy job, and print jobs when
using the printer function.
• When two-sided copying is
performed, this function
rotates the image on the back
1: ON
of the original. This is
2: OFF
convenient when binding the
copies at the top (tablet
binding).
USER SETTINGS
Explanation
). Normal operation
)) can be
7
65