Sharp AL-1651CS Operation Manual page 22

LOADING PAPER
4 Fan the paper and insert it into the tray. Make sure that the
edges go under the corner hooks.
• Do not load paper above the maximum height line (
Note
• If the paper is not fanned, double-feeds or misfeeds may occur.
• Make sure the stack of paper is straight before loading it. When
• Make sure that all the paper in the stack is the same size and type.
• When loading paper, ensure that there is no space between the
5
Gently push the paper tray back into the machine.
• If you loaded a different size of paper than was loaded previously in
Note
• When not using the machine for an extended period, remove all
20
Exceeding the line will cause a paper misfeed.
adding paper, take the remaining paper out and combine it into a
single stack with the new paper.
paper and the guide, and make sure that the guide is not set too
narrow and causes the paper to bend. Incorrect loading will cause the
paper to skew or misfeed.
the tray, go to "CHANGING A TRAY'S PAPER SIZE SETTING"
(p.23)
paper from the paper tray and store it in a dry place. If paper is left in
the machine for an extended period, the paper will absorb moisture
from the air, resulting in paper jams.
).