Sharp AL-1651CS Operation Manual page 36

CONVENIENT COPY FUNCTIONS
Using the RSPF
1
Place the originals. (p.25)
2
Press the [E-SORT/SP.FUN] key until
"SORT" appears and then press the
[ENTER] key.
3
Press the [
the "ON" position and then the [ENTER]
key.
4
Select the number of copies and any other settings, and then
press the [START] key (
The copies are delivered to the paper output tray.
• To cancel the sort copy job, press the [CLEAR] key (
Note
• To cancel sort copy mode, press the [CLEAR ALL] key (
If the memory becomes full
• If the memory becomes full while scanning the originals, "MEMORY FULL,
PRESS START TO RESUME" will appear in the display, and the machine will
stop copying.
• To copy the originals that have been scanned up to that point, press the
[START] key (
• To clear the data that has been scanned into memory, press the [CLEAR ALL]
key ( ) or the [CLEAR] key (
Offset function during sort copy
The offset function shifts the position of each set of copies in the paper output tray
for easy separation.
The offset function can be changed with "OFFSET FUNCTION" in the user
programs. (p.65)
3
2
1
Offset function
34
] key ( ) to move "
).
).
).
When offset function is disabled
SPECIAL FUNCTION
SORT
" to
SORT
ON OFF
).
).
3
2
1