Making Copies; Normal Copying - Sharp AL-1651CS Operation Manual

3 Chapter 3

MAKING COPIES

This chapter explains basic copying functions.

NORMAL COPYING

Using the document glass
Note
1
Open the RSPF, and place the original face down on the
document glass.
[How to place the original]
Align the original with the original scale and the
centering (
2
Gently close the RSPF.
3
Select the number of copies and other copy settings, and then
press the [START] key (
Note
Copying books or originals with folds or creases
Press down on the RSPF while copying as shown. If
the RSPF is not completely closed, shadows may
appear on the copy or it may be fuzzy. Straight
originals with folds or creases well before placing.
24
• The document glass can scan up to a 8-1/2" x 14" original.
• When a copy is made, the edges will not be copied (image loss). For
the image loss, see the "SPECIFICATIONS" (p.92).
) mark.
• To stop copying in the middle of a run, press the [CLEAR] key (
• For the copy settings, see pages 26 through 36.
Original scale
).
mark
).