System Test - Toshiba Satellite U840 Maintenance Manual

Test Program for Field.
3.4

System Test

To execute the System Test select 01 from the Diagnostic Test Menu, press Enter and follow
the directions on the screen. The System Test contains three subtests. Move the highlight bar
to the subtest you want to execute and press Enter.
Subtest 01 FAN ON/OFF Checking
Select 1,2,3 to control FAN on/off , 1=Fan on , 2=Fan off , 3=Exit .
[BOIFAN.EXE] Program Version : 1.0
1: Fan On 2: Fan Off 3: Exit
Fan1 Status On Fan1RPM : 5000 or Fan1 Status OFF Fan1RPM : 0
Fan2 Status On Fan2RPM : 2500 or Fan2 Status OFF Fan2RPM : 0
Subtest 02 Battery Test
This will display battery information for check , press [ESC] to exit .
[BOIPCU.EXE] Program Version : 1.1 03-20-2010
voltage
temperature
current
average current
relative state of charge : 100 %
absolute state of charge : 95 %
remaining capacity
full charge capacity
run time to empty
average time to empty
average time to full
cycle count
design capacity
design voltage
specification information : 3.1
serial no.
STATUS
Press [ESC] KEY to exit
Satellite U840 Tests and Diagnostics Manual
: 8314 mV Remaining capacity alarm
: 24.4 'C Remaining time alarm
: 0 mA Battery mode
: 0 mA AtRate
At rate time to full
At rate time to empty
: 6873 mAh At rate O. K.
: 6873 mAh Maximun error
: -1 min. Charging current
: -1 min. Charging voltage
: -1 min. Manufacturer name
: 3 times Device name
: 7310 mAh Device chemistry
: 7400 mV Manufacturer data
Manufacture date
: 107
: INIT DISK FULL_CHG
: 730 mAh
: 10 min
: 6001
: 0 mA
: 65535 min
: 65535 min
: 1
: 1 %
: 0 mA
: 8340 mA
: Simplo
: NS3P2SZGI6WR
: LION
: 0
: 11/16/2011
11