2 Troubleshooting Procedures
Procedure 4
Diagnostic Test Program Execution Check
The SSD/HDD test program is stored in the Diagnostics Disk. Perform all of the SSD/HDD
tests in the Hard Disk Drive Test. Refer to Chapter 3, Tests and Diagnostics, for more
information about the SSD/HDD test program.
If an error is detected during the SSD/HDD test, an error code and status will be displayed.
The error codes and statuses are described in Table 2-8. If an error code is not displayed but
the problem still occurs, go to Procedure 5.
Table 2-3 2.5" Hard disk drive error code and status
22
Satellite U840 Maintenance Manual (960-Q08)