Toshiba Satellite U840 Maintenance Manual page 143

Replacement Procedures
Installing HDD/ SSD
The following describes the procedure for installing the main HDD/SSD.
1. Connect HDD cable to HDD connector.
2. Install a HDD assembly to the top case holder area and then assemble two PCS HDD
3. bracket with the with screws M2.0×2.5-I(BUWZN) 4PCS
4. Connect HDD cable to main board connector and daughter board connector.
5. Insert the 128GB SSD to SSD slot slantwise and press it to connector firmly, then
lock with screw M2.0×2.5-I(BUWZN) 1PCS
6. Insert the 16GB SSD to SSD slot slantwise and press it to connector firmly, and lock
with screw M2.0×2.5-I(BUWZN) 1PCS
Satellite U840 Maintenance Manual (960-Q08) 4-16