Toshiba Satellite U840 Maintenance Manual page 180

Chapter 4 Replacement Procedures
4.17 Touch pad
Removing the touch pad
The following describes the procedure for removing the touch pad (See Figure 4-17-1 to 4-
17-4).
1. Disconnect TP FFC from main board and touch pad board connectors.
2. Peel off aluminum from TP bracket.
3. Remove TP bracket screws M2.0x2.5-I (BUWZN) x3PCS, disassemble TP bracket.
4. Remove TP frame screws M2.0x2.5-I (BNI) x2PCS, disassemble Touch pad.
Figure 4-17-1 Disconnect TP FFC from main board and touch pad board connectors.
53
Satellite U840 Maintenance Manual (960-Q08)