Assign an IP Address:
1. Press the
button.
2. Press the
button to highlight Interface Menu.
3. Press the
button.
4. Press the
button to highlight Ethernet.
5. Press the
button.
6. Press the
button to highlight TCP/IP.
7. Press the
button.
8. Press the
button to highlight IP Address.
9. Press the
button.
10. Press the
button or
digits of the valid IP address (including leading zeros).
11. Press the
button to move to the next 3‐digit section in the IP address.
12. Repeat step 10 and 11 for the other three 3‐digit sections.
13. If the complete IP address is setup,
14. Press the
button.
15. Press the
button until you see Ready.
button to change the first 3 digits to match the first 3
Page 42 of 48