Konica Minolta pagepro 4650EN Quick Manual page 38

5 Squeeze the media guide
(length) and slide it to the
desired paper size.
6 Squeeze the media guide
(width) and slide it to the
desired paper size.
7 Load the banner paper face up
in the tray, and then roll up the
end of the paper so that it does
not fall off the tray.
8 Push the tray completely into
the printer.
9
Select PAPER MENU/PAPER
SOURCE/TRAY 1/PAPER SIZE and
PAPER TYPE in the configuration
menu, and then select the setting
for the size and type of the media
that is loaded.
Setup the printer and the printer driver as described in the chapter: Print on Custom Media
sizes.
Page 38 of 48