Grounding The Device; Connecting To The Device - Siemens RUGGEDCOM RS416P Installation Manual

RUGGEDCOM RS416P
Installation Guide
1
Figure 14: Failsafe Alarm Relay Wiring
1. Screw-Type Terminal Block
Terminal
Section 2.4

Grounding the Device

The RS416P chassis ground terminal uses a #6-32 screw. It is recommended to terminate the ground connection
with a #6 ring lug and torque it to 1.7 N·m (15 lbf·in).
Figure 15: Chassis Ground Connection
1. Stainless Steel Stud
Section 2.5

Connecting to the Device

The following describes the various methods for accessing the ROS console and Web interfaces on the device.
For more detailed instructions, refer to the ROS User Guide for the RS416P.
Grounding the Device
3
4
2. Pluggable Terminal Block
2. #6-32 Screw 3. #6 Ring Lug
5
3. Normally Open Terminal
1
3 5
4
4. Common Terminal
2
3
Chapter 2
Installing Device
2
5. Normally Closed
17