Precision Time Protocol (Ptp) Support - Siemens RUGGEDCOM RS416P Installation Manual

RUGGEDCOM RS416P
Installation Guide
• Communication Ports – Ports for communicating with other devices or accessing the RUGGEDCOM ROS
operating system are described in
• Port Status Indicator LEDs – Port status indicator LEDs indicate the operational status of each port,
dependent on the currently selected mode.
Mode
Status
Duplex
Speed
• Display Mode Indicator LEDs – The display mode indicator LEDs indicate the current display mode for the
port status indicator LEDs (i.e. Status, Duplex or Speed).
• Mode button – The Mode button sets the display mode for the port status indicator LEDs (i.e. Status, Duplex
or Speed). It can also be used to reset the device if held for 5 seconds.
• Alarm Indicator LED – The alarm indicator LED illuminates when an alarm condition exists.
• Power Module Indicator LEDs – The power module indicator LEDs indicate the status of the power modules.
▪ Green – The power supply is supplying power
▪ Red – Power supply failure
▪ Off – No power supply is installed
• RS-232 Console Port – The serial console port is for interfacing directly with the device and accessing initial
management functions. For information about connecting to the device via the serial console port, refer to
Section 2.5, "Connecting to the
Section 1.3

Precision Time Protocol (PTP) Support

The Precision Time Protocol (PTP) module adds the ability to provide time synchronization via Ethernet using
the Precision Time Protocol (PTP) and Network Time Protocol (NTP), and to synchronize with an external IRIG-B
source.
The PTP module features BNC ports for TTL IN and TTL OUT. It also includes an LED to indicate when
synchronization has been achieved.
Precision Time Protocol (PTP) Support
Chapter 3, Communication
Color/State
Solid
Blinking
Off
Solid
Blinking
Off
Green (Solid)
Green (Blinking)
Orange (Solid)
Off
Device".
Ports.
Description
Ethernet Ports
Link detected
Link activity
No link detected
Full duplex mode
Half duplex mode
No link detected
1000 Mb/s
100 Mb/s
10 Mb/s
No link detected
Chapter 1
Introduction
Serial Ports
—
Traffic detected
No traffic
+ 57601 bps
19201 to 57600 bps
0 to 19200 bps
3