Programming (Changing) The Agitation Time - Cornelius IDC 255 Installation Manual

The agitation time equals the dispense time multiplied by the agitation ratio. The user is given the
flexibility to change the agitation ratio thereby altering the agitation time in order to ensure that the ice
chute is always filled with ice for all the different ice types.

Programming (Changing) the Agitation Time

1. Simultaneously Press and hold for 3 seconds, the
buttons
2. The LED meter turns ON once the programming mode is entered. Visual feedback of ratio/agitation
time is obtained from the visual programming LED
existing agitation ratio enabling the user to.
3. Vary the agitation time using the directional arrow buttons. Left to decrease and right direction
arrow button to increase.
© 2006, IMI Cornelius Inc.
2
10 12 14 16 18 20
FIGURE 17
to enter the programming mode.
- 15 -
IDC 255 Progate Drive Thru Installation Manual
22 26 28
24
button and also both direction arrow
. The LED meter shows the
Publication Number: 621057419INS