Installing The Optional Motorized Outdoor Air Damper With Louver Panel Door Only - Daikin VHF Installation And Maintenance Manual

Installing The Optional Motorized Outdoor
Air Damper with Louver Panel Door Only
1 . Install the return air panel door assembly as described in
"Installing The Return Air Panel Door" on page
3 . Fasten the damper assembly to the door frame with the
provided screws. On left hand hinged doors the damper
assembly will mount on the hinge side with the motor
located at the bottom, and with right hand hinged doors
the damper assembly will mount on the right side with the
motor in the top position.
4 . Wire the damper assembly motor using the correct
schematic based on the unit motor type and voltage,
(Figure 42 through Figure
Note: It is the responsibility of the installing contractor to
install the ductwork that connects the outdoor air
opening in the panel door frame to the source of the
outdoor intake opening in the building. All ductwork
should conform to industry standards of good practice
as described in the ASHRAE Systems Guide. Also refer
to good installation practices as outlined in ED 18529.
IM 986-11 • Vertical Stack WSHP
32.
47).
Figure 41: Fasten the outside air damper assembly to the
louver panel door frame
Motorized outdoor air
damper option
33
i
nstallation
Fasten the damper as-
sembly to the door frame
at the appropriate open-
ing with provided screws
Alternate knockout
opening for mount-
ing the motorized
outdoor air damper
(right-hand hinge)
www.DaikinApplied.com