Troubleshooting Guide - Kenwood ProTalk TK-3501 Instruction Manual

Problem
Cannot turn the transceiver
power ON.
Battery deterioration occurs
when a battery pack is
charged repeatedly.
Cannot talk to or hear other
members in your group.
Other voices (besides group
members') are present on the
channel.
Note:
◆ If the problem persists, contact a KENWOOD authorized service
center for repairs. You may return your transceiver for service to
the authorized KENWOOD dealer from whom you purchased it or
any authorized KENWOOD service center.

TROUBLESHOOTING GUIDE

•
•
•
•
•
•
Solution
The battery pack is discharged.
Recharge the battery pack or replace
the batteries.
The battery pack may not be installed
correctly. Remove the battery pack and
install again.
The battery pack life is fi nished. Replace
the battery pack with a new one.
Make sure you are using the same
frequency and QT/DQT settings as the
other members in your group.
Other group members may be too far
away. Make sure you are within range of
the other transceivers.
Change the QT/DQT settings. Make sure
all group members change the settings
on their transceivers to match the new
QT/DQT setting.
21