Kenwood ProTalk TK-3501 Instruction Manual page 24

CHANNEL CONFIRMATION MODE
To confi rm your channel frequency setting:
1 With the transceiver power OFF, press and hold the PTT
switch while turning the transceiver power ON.
• Continue to hold the PTT switch until the LED lights orange
(approximately 2 seconds).
2 Release the PTT switch.
• The transceiver emits a morse code of the current channel
setting. Refer to the table for the morse code output. {p.12}
3 Rotate the Channel selector to your desired channel within 6
seconds, otherwise the operation will cancel.
• The transceiver emits a morse code of the current channel
setting.
• The transceiver will automatically return to normal operation
when no action is performed for approximately 6 seconds.
To confi rm your channel QT/DQT setting:
1 With the transceiver power OFF, press and hold the Side key
while turning the transceiver power ON.
• Continue to hold the Side key until the LED lights orange
(approximately 2 seconds).
2 Release the Side key.
• The transceiver emits a morse code of the current channel
setting. Refer to the table for the morse code output. {p.12}
3 Rotate the Channel selector to your desired channel within 6
seconds, otherwise the operation will cancel.
• The transceiver emits a morse code of the current channel
setting.
• The transceiver will automatically return to normal operation
when no action is performed for approximately 6 seconds.
16