Working With The Operating Menu - Sennheiser SK 5212 Instructions For Use Manual

Working with the operating menu

The operating menu has three modes:
!
Display mode
In display mode, you can display the current menu settings one after the
other – even when the lock mode is activated.
!
Selection mode
In selection mode, you can select the menu whose setting you want to
change. To change to the selection mode, the lock mode must be deacti-
vated.
!
Setting mode
In setting mode, you can change the setting of the selected menu.
By way of example of the "LOWCUT" menu, this section describes how to
use the operating menu.
Display Mode
SET/ON
MHz
MHz
Selection Mode
SET
SET
TUNE
MHz
SET
LOWCUT
MHz
Current low-cut
Adjusting
frequency
the low-cut
frequency
Setting Mode
SET
Current low-cut
frequency
STORED
SET
120
Hz
FLAT
Hz
FLAT,
120 Hz
15