Sennheiser SK 5212 Instructions For Use Manual page 17

After switch-on
After switch-on, the standard display is shown on the LC display panel
Depending on the setting, the transmission frequency, the channel number
or the name of the transmitter is displayed.
Displaying the menu settings in display mode
In display mode, and with the lock mode activated, you can display the
current menu settings one after the other (see "Overview of the operating
menu" on page 19). After a few seconds, the display returns to the
standard display.
SET
UP
DOWN
Changing to the selection mode
To change from display mode to selection mode, you have to deactivate the
lock mode.
Deactivate the lock mode as described in the chapter "Deactivating the
autolock function temporarily" on page 14. You can now select the
menu whose settings you want to adjust.
Press the multi-function switch
the menu that was displayed in display mode.
Selecting a menu
SET
UP
DOWN
16
Slide the multi-function switch
position (UP) or
menu settings. If you slide the multi-function
switch repeatedly to the same position, all
menu settings are displayed one after the
other.
(switch position SET) to change to
Slide the multi-function switch
(UP) or (DOWN).
Press the multi-function switch
position SET).
The name of the selected menu starts flashing.
to the
(DOWN) to display the
to the position
(switch
.