Sennheiser SK 5212 Instructions For Use Manual page 23

The frequencies are tunable in 5-kHz steps within a switching bandwidth of
36 MHz max.
Note:
When operating a multi-channel system, make sure to only use inter-
modulation-free frequencies.
There are two options for setting the frequencies:
!
You can set a new frequency for the selected channel:
SET
UP
DOWN
CH
CH
MHz
MHz
!
You can change to a different channel and set a new frequency for the
new channel:
SET
UP
DOWN
CH
CH
CH
CH
22
In the selection mode of the "TUNE" menu,
press the multi-function switch
position
appears on the display and then the currently
assigned frequency is displayed.
Change the frequency by sliding the multi-
function switch
(DOWN).
Store your setting.
Press the multi-function switch
position SET) for a longer time. The current
channel flashes on the display.
Select a new channel by sliding the multi-
function switch
(DOWN).
Confirm your selection by pressing the multi-
RF
function switch (switch position SET).
SET). The current channel number
to the position
to the position
(switch
(UP) or
(switch
(UP) or