The Extended Menu "Advanced Menu - Sennheiser evolution wireless series EM 100 Instruction Manual

Adjustment tips and functions
Menu
Squelch
Easy Setup Setup
Frequency Preset
Name
AF Out
Equalizer
Auto Lock
Advanced
Exit
Advanced Menu
Tune
Guitar TunerSetup
Pilot Tone
LCD Contrast
Reset
Software Revision
Exit
Setting a receiving
frequency for the
current channel
38
The extended menu
To get into the extended menu
From the main menu, select "Advanced".
Setting receiving frequencies for the frequency bank "U"
When you have selected one of the system banks and then select
the "Tune" menu, the receiver automatically switches to channel 1
of the frequency bank "U". In this case, "U.1" briefly appears on the
display panel.
Upon delivery, the channels of the frequency bank "U" are not
assigned a receiving frequency.
Via the "Tune" menu item, you can set a receiving frequency to be stored
in the current channel
frequency bank "U" and assign this channel a receiving frequency.
It is vital to observe the notes on frequency selection on page 42.
Press the UP/DOWN button until the "Tune" menu item
appears.
Press the SET
SET
The frequency selection appears.
PEAK
Advanced Menu
40 0
-10
25 Tune
-20
10
-30
531.375 MHz
RF AF
Call up "Tune"
Set the desired frequency.
Press the SET
SET
Your settings are stored.
You are back to the operating menu.
"Advanced Menu"
"Advanced Menu":
or you can select a different channel in the
button.
SET
PEAK
Tune
40 0
-10
25 531.375 MHz
-20
10
-30
B.Ch: U. 1
AF
RF
Select the MHz value
and confirm
"Stored"
button.
SET
PEAK
Tune
0
40
-10
25 534.208 MHz
-20
10
-30
B.Ch: U. 1
RF AF
Select the kHz value;
store the setting
SET