Installation Installation Attaching the microphone Fasten the holder to the microphone using the screw. Connecting the microphone Connect the XLR-3 socket of the microphone cable (optional accessories) to the XLR-3 socket of the microphone. e 904 | 3/7...
Operation Positioning the microphone on a drum Use the microphone clamp to attach the e 904 to the rim of the drum. Position the microphone on the drum so that it is 3 to 5 c m above the drumhead.
Page 5
Cleaning and maintaining the e 904 Positioning the monitor loudspeakers To prevent feedback and crosstalk, postion your monitor loudspeakers in the angle area of the highest cancellation of the microphone (approx. 180°). 180° Cleaning and maintaining the e 904 CAUTION LIQUIDS CAN DAMAGE THE ELECTRONICS OF THE PRODUCT! Liquids entering the housing of the product can cause a short-circuit and damage the electronics.