The Extended Menu "Advanced Menu - Sennheiser SKM 2000 Instruction Manual

Adjusting settings via the operating menu
The extended menu
Setting the transmission frequencies and the frequency banks
"U1" to "U6" – "Tune"
When you have selected one of the system banks and then select
the "Tune" menu, the radio microphone automatically switches to
channel 1 of the frequency bank "U1". In this case, "U1.1" briefly
appears on the display panel.
Upon delivery, the channels of the frequency banks "U1" to "U6"
are not assigned a transmission frequency.
When you are in the "Tune" menu item, the RF signal is
deactivated.
Via the "Tune" menu item, you can:
1. set a transmission frequency to be stored in the current channel of the
frequency bank ("U1" to "U6")
2. or select a frequency bank ("U1" to "U6") and a channel and assign this
channel a transmission frequency.
It is vital to observe the notes on frequency selection on page 27.
Setting a transmission frequency for the current channel
Move the multi-function switch until the "Tune" menu item
appears.
Press the multi-function switch.
The frequency selection appears.
Advanced Menu
Tune
543.200 MHz
Call up "Tune"
(special function)
Set the desired frequency.
Press the multi-function switch.
Your settings are stored.
You are back to the operating menu.
24
"Advanced
Tu n e
543.200 MHz
B.Ch: U1. 1
Select the frequency
bank and confirm
"Stored"
Menu"
Tu n e
543.200 MHz
B.Ch: U1.
Select the channel;
store the setting
1