Putting the Set 830 S-MKE into operation
Connecting headphones
Connect the 3.5 mm jack plug of the headphones to the
7
socket
of the receiver.
Wearing the receiver
In order to wear the receiver, you can use the supplied
P
lanyard
, the clip
loop is suitable for users of hearing aids, the lanyard and
the clip are useful if you are using headphones.
Wearing the receiver around the neck
If you want to wear the receiver around your neck, use
• the supplied lanyard
• the connected induction loop (where applies).
To attach the lanyard
P
12
O
or the induction loop. The induction
P
or
P
:
Connect the fasteners of the
P
lanyard
rear of the receiver.
Wear the receiver around your
neck, with the Sennheiser logo
facing away from your body.
7
to the metal ring at the