Connecting Headphones Or The Induction Loop For Hearing Aids To The Receiver - Sennheiser Set 830 S-MKE Instruction Manual

Connecting headphones or the induction loop for
hearing aids to the receiver
7
The socket
• an induction loop,
• headphones or
• a connection cable to your hearing aid.
Connecting the induction loop
Carefully remove the clip
Attach the clip of the induction loop as shown.
Connect the induction loop to the socket
receiver.
Set your hearing aid to position "T".
If your hearing aid has no position "T", please contact your
hearing aid acoustician.
Note:
For alternative connection possibilities to your hearing
aid as well as the connection to cochlea implants, please
contact your hearing aid acoustician.
Putting the Set 830 S-MKE into operation
of the receiver allows you to connect
O
7
from the receiver.
7
of the
11