Receiver Status Led; Transmitter Status Led; Overview Of The Acoustic Signals/Beeps - Sennheiser Flex 5000 Manual

Flex_5000_570735_0117_PRT.book Seite 5 Montag, 10. Oktober 2016 3:58 15
Receiver status
Receiver status
LED
–
lights up green
lights up red
1s 1s
flashes green
1s 1s
flashes red
Transmitter status
Transmitter status LED
–
lights up white
lights up blue
flashes blue and white

Overview of the acoustic signals/beeps

Beeps...
during operation,
2 beeps
during operation, no audio
transmission, 5 beeps
when changing the
volume
when changing the
balance setting
LED
Receiver ...
... is switched off.
... is connected to the transmitter.
... is connected to the transmitter, the
rechargeable battery is almost empty.
... is not connected to the transmitter or
cannot connect to the transmitter.
... is not connected to the transmitter or
cannot connect to the transmitter, the
rechargeable battery is almost empty.
LED
Transmitter...
... is in standby mode.
... and stethoset receiver are connected. The
speech intelligibility function is deactivated
(see page 22).
... and stethoset receiver are connected. The
speech intelligibility function is activated
(see page 22).
... has detected an incompatible digital audio
signal (see page 7).
Meaning
The rechargeable battery is almost empty,
recharge it (see page 11).
The receiver is outside the transmission
range (see page 35).
The maximum or minimum volume is
reached (see page 18).
The maximum or minimum balance setting is
reached (see page 19)
Product overview EN
Flex 5000 | 5