Paper Loading Method; With Tm-L90 - Epson TM-L90 Technical Reference Manual

2.9 Paper Loading Method

WARNING:
Do not open the roll paper cover (for the TM-L90 Peeler Model, do not open the peeler
cover and the roll paper cover) during the operation. Doing so may damage the
printer.
Do not touch the manual cutter with your hands when installing or replacing roll paper.
Touching the manual cutter may result in injury.
For the TM-L90, when the printer is placed horizontally, the raised roll paper cover may
close suddenly depending on the inclining angle of the printer. Take care not to get
your finger caught in it.
Note:
Be sure to use roll paper that meet the specifications.

2.9.1 With TM-L90

1. Open the roll paper cover, using the cover open lever.
2. Pull out roll paper with little paper remaining and insert new roll paper, aligning the paper
with the guide, as shown below.
3. Close the roll paper cover; then cut off the paper with the manual cutter.
WARNING:
Be careful that your finger is not inside the printer when you close the cover
because you can get your finger caught inside.
TM-L90/TM-L90 Peeler Model Technical Reference Guide
Setup 55