Epson TM-L90 Technical Reference Manual page 108

WARNING:
Do not touch the area beyond the cutter blade edge. To do so may lead to injury
to your fingers.
Note:
Remove the accumulated adhesive behind the edge of the cutter blade. It is not necessary to polish it to
a mirror finish.
It is recommended not to use alcohol-based solvents. To do so may dissolve the adhesive and make
removing it even more difficult.
5. Insert the roll paper after removing the adhesive.
For the method of inserting the roll paper, refer to "Paper Loading Method" on page 55.
WARNING:
Be sure to remove your finger from inside the roll paper cover when you close it, or
you can get your finger caught inside.
6. Close the roll paper cover.
108 Handling
Adhesive being removed with flat-blade screwdriver