Table of Contents
Advertisement
8
EN
and from the air outlet and do not
obstruct the air vents.
11) Stop the motor:
– when mounting or removing
accessories for blo wing or col-
lecting:
– whenever you leave the ma-
chine unattended;
– during movements between
work areas.
12) Stop the motor and unplug
the power cable (making sure that
all moving parts are stationary):
– when transporting the
machine;
– whenever you leave the ma-
chine unattended;
– before cleaning, checking or
working on the ma chine;
– after the intake of a foreign
body. Inspect the machine for
any damage and make repairs
be fo re restarting it again;
– if the machine starts to vibrate
abnormally;
– when the machine is not in use.
13) To avoid the risk of fire, do
not leave the ma chi ne with the
motor hot on leaves, dry grass or
other inflammable material.
14) – Keep the cable behind and
away from the machine.
– If a cable is damaged during
use, immediately disconnect
it from the network. DO NOT
TOUCH THE CABLE UNTIL
IT IS DISCONNECTED FROM
THE NETWORK.
– Never blow dirt in other
people's direction.
D) MAINTENANCE AND
STORAGE
1) Keep all nuts, bolts and screws
tight to be su re the equipment is
in safe working condition. Rou-
tine maintenance is essential for
safety and for maintaining a high
performance level.
2) Do not perform any work on
the machine that is not described
in this manual unless adequately
skilled with appropriate tools.
3) Allow the motor to cool down
before storing in any enclosure.
4) To reduce fire risks, do not le-
ave containers with debris inside
a room.
5) Wear work gloves when per-
forming all maintenance.
6) For safety reasons, never use
the machine with worn or dam-
aged parts. Damaged parts are to
be replaced and never repaired.
Only use original spare parts.
Parts that are not of the same
quality can seriously damage
the e quip ment and compromise
safety.
7) Before putting the machine
away, check you ha ve removed
wrenches or tools used for main-
tenance.
8) Store the machine out of the
reach of children.
9) Often inspect the bag to avoid
wear and a decrease in quality.
10)
Never attempt to bypass the
locking function of the protective
device.
E) ADDITIONAL WARNINGS
1) Before each use, check the
machine for damage. Any re-
pairs must be done at a speciali-
sed centre. Turn off the machine
and disconnect the plug from the
socket if the machine begins to vi-
brate abnormally, then contact a
specialised centre for inspection.
2) Parts subject to wear must only
be replaced at a specialised cen-
tre.
3) Never use the machine if the
power cable or extension cable
SAFETY WAR NINGS
Advertisement
Table of Contents
