Registration; Image Position/Magnification - Ricoh Pro C9200 Operating Instructions Manual

3. Details of Advanced Settings

Registration

Image Position/Magnification

1101 [Image Position]
1102 [Auto Adjust Image Position]
1103 [Image Position Feedback Correction]
1104 [Image Position Feedback Correction: Gap]
Function
Adjusts the position and magnification of the image to be printed on the paper.
When to use
• To align the images printed on the front and back sides of the paper.
Insufficient margin at the leading edge may cause wrap around jams in the fusing unit or
affect the images at the leading edge. Increasing the margin is effective in such cases.
• To switch the sensor to be used between plain paper printing and special paper printing, such
as printing on colored paper and transparencies.
Related Troubleshooting
• Adjusting the Image Position on Side1
• Adjusting the Image Position on Side2
• Horizontal Streaks at the Area within 20 mm (0.8 inches) from the Leading Edge
• Aligning the Image Position on Side 2 to That on Side 1 (Using a Template to Align the Image
Position on Side 1 and 2)
• Other Paper Delivery Problems
For detailed procedure, see the Troubleshooting manual.
26