Ricoh Pro C9200 Operating Instructions Manual page 39

Sheets float up and tend to result in double-
feeds.
Related Troubleshooting
None
Main/2-Tray LCIT: side fan level
1302 [Main/2-Tray LCIT: Fan/Shutter]
Function
Adjusts the amount of air blown from the side fans to separate the sheets.
When to use
If double-feeds do not improve by setting 1301: [Main/2-Tray LCIT: Paper Feed Mode] to
[Prevent Double Feed (Weakest Blow)], decrease the airflow in [Updraft Fan Level] in steps of
10%.
Sheets do not separate well because air does
not flow in between the sheets. Also, the sheets
tend to float up and result in double-feeds.
Related Troubleshooting
None
Main/2-Tray LCIT: vacuum fan level
1302 [Main/2-Tray LCIT: Fan/Shutter]
Function
Adjusts the amount of air sucked against the paper feed belt.
* If non-feeds occur due to low air suction power, increase the power.
Face curl
[Side Fan Level]
Face curl
[Vacuum Fan Level]
Back curl
Sheets get pressed down and tend to result in
non-feeds.
Back curl
Sheets do not separate well because air does
not flow in between the sheets. Also, the sheets
tend to get pressed down and result in non-
feeds.
Paper Feed/Delivery
37