Ricoh Pro C9200 Operating Instructions Manual page 45

For detailed procedure, see the Troubleshooting manual.
Fusing belt feed speed
1331 [Motor Speed] [Speed Adjustment]
1331 [Motor Speed] [Speed Adjustment]
1331 [Motor Speed] [Speed Adjustment]
Function
Adjusts the rotation speed of the fusing belt.
When to use
Slow fusing speed causes the sheets to slacken before entering the fusing nip and scatter the toner
image. In such case, increase the fusing belt rotation speed.
For banner printing, decrease the belt rotation speed by 0.5%.
Related Troubleshooting
• Glossy Lines at the Edge of the Paper
• Uneven Gloss: Foggy
• Shortening the Leading/Trailing Edge Margins
For detailed procedure, see the Troubleshooting manual.
Process Speed Setting
1331 [Motor Speed] [Speed Adjustment]
Function
Adjusts the speed of all the motors related to paper transport.
When to use
Insufficient fusing, wrinkles on thin paper, image quality degradation.
Related Troubleshooting
• Improving Fusibility
• Horizontal Streaks: When Using Thick Paper (1)
• Uneven Gloss
• Creases, Worm Track (Wavy Streaks), or Bends Appear
• If (J086) Appears
• Delivered Sheets Are Not Stacked Properly
For detailed procedure, see the Troubleshooting manual.
03: [Trans-Fusing Transf Belt 1]
04: [Trans-Fusing Transf Belt 2]
05: [Fusing Belt]
06: [Process Speed Setting]
Paper Feed/Delivery
43