Ricoh Pro C9200 Operating Instructions Manual page 31

For detailed procedure, see the Troubleshooting manual.
Belt-to-paper transfer correction: LE/TE
1217 [Paper Transfer Output Correction: Paper Edge]
Function
Adjusts the amount and area (width) of the bias applied at the leading/trailing edges for the belt-
to-paper transfer process.
When to use
• Image is affected/abnormal at the trailing edge.
Related Troubleshooting
• Density Fluctuation at the Leading Edge (When Using Thick Paper)
• Density Fluctuation at the Trailing Edge (When Using Thick Paper)
• Faint Image around the Leading Edge
• Toner Scattering: Trailing Edge
For detailed procedure, see the Troubleshooting manual.
Paper transfer gap
1227 [Paper Transfer Nip Operation Mode]
1228 [Paper Transfer Nip]
Function
Adjusts the gap between the PTR and ITB and the timing of when to contact/separate the PTR and
ITB.
Default setting of 1227: [Paper Transfer Nip Operation Mode] by type/thickness:
1. OFF: Thick 1 - 2, envelope, transparency, plastic folder, magnet sheet
2. Small gap: Thick 3 - 5 (excluding envelope, transparency), Thick 6 - 8 (including coated,
metallic/pearl)
3. Large gap: (Not used)
4. Small/Large gap: Thick 6 - 8 (excluding coated, metallic/pearl)
When to use
Image is affected/abnormal at the trailing edge
Related Troubleshooting
None
Image Quality
29