Service and maintenance
8.2 Checking and changing lubricants
①
②
T
I
Figure 8-4
Grease service life of roller bearing greases
Roller bearings and the clearance in front are filled with sufficient grease.
Under approved operating conditions and ambient temperatures, no regreasing is required.
We recommend that the grease in the bearings is also renewed when the oil or shaft sealing
rings are replaced.
78
Mineral oil
Synthetic oil
Oil-bath steady-state temperature [°C]
Oil change interval in operating hours [h]
Guide values for oil change intervals
Operating Instructions, 11/2017, A5E37880173A/RS-AE
BA 2030