Table of Contents
Advertisement
①
②
③
Figure 8-1
Table 8- 2
Oil level hole
G 1/8"
G 1/4"
G 3/8"
G 3/4"
Procedure
1. Switch off the power supply to the drive unit.
2. Unscrew the oil level screw, see AUTOHOTSPOT. Oil escapes if the maximum fill level is
above the plug hole.
3. Check the oil level. Observe the fill level x.
4. Top up the oil level if necessary and check it again.
5. Check the state of the sealing ring on the sealing element. If the sealing ring is damaged,
replace the sealing element with a new one.
6. After checking, seal the gearbox immediately using the sealing element.
You have now checked the oil level in the gearbox housing.
BA 2030
Operating Instructions, 11/2017, A5E37880173A/RS-AE
Specified oil level
Maximum oil level
Minimum oil level
Oil level in the gearbox housing
Minimum and maximum fill levels x
∅d2
[mm]
14
18
22
32
Service and maintenance
8.2 Checking and changing lubricants
Fill level x
[mm]
2.5
3
4
7
Tightening torque
[Nm]
10
10
25
50
69
Advertisement
Table of Contents
