Table of Contents
Advertisement
Setting the lubrication time
Setting the wrong lubrication time
The lubrication time is heavily influenced by the resistance in the lubricant channels and the
ambient temperature.
Check the actual lubrication time during operation.
The actual lubrication time is the time it takes for the lubricator to be completely emptied.
The lubrication time is influenced by the resistance in the lubricant channels and the ambient
temperature.
At an ambient temperature of -10° C, the actual lubrication time is twice that for the set
temperature.
At an ambient temperature of +40° C, the actual lubrication time drops to approximately half
that for the set temperature.
Figure 5-6
Procedure
1. Set the lubrication time with a 3 mm Allen key.
2. Note the date of commissioning and the lubrication time on the lubricator.
The times in months listed in the table are guide values.
Table 5- 2
Size
Months
BA 2030
Operating Instructions, 11/2017, A5E37880173A/RS-AE
CAUTION
Lubrication time controller
Timing in months on the lubrication time controller
89
12
5.5 Options of the VLplus heavy-duty bearing system
109
129
12
12
Commissioning
149
169
12
11
57
Advertisement
Table of Contents
