Appendix
Technical specifications
Model variant
Compliance
Power supply
Rated voltage
Rated current
Rated frequency
Max. output
Charging connection
Circuit-protection devices
Control / Customization
Upstream fuse
Factory setting for maximum charging current
PE system
Operating temperature
Storage temperature
Relative humidity
Class of protection
Overvoltage category
Degree of pollution
Rated insulation voltage (U
)
i
Rated impulse voltage (U
)
imp
Rated peak withstand current (I
)
pk
Rated short-time withstand current (I
Rated conditional short-circuit current (I
Rated diversity factor (RDF)
Degree of protection (housing)
Impact strength
Dimensions (housing)
Maximum elevation
Weight per unit (net)
Weight per unit (gross)
12
for supply cable sizes of up to 5 x 16 mm²
32 A, single or 3-phase
Fixed charging cable with charging plug according to IEC 62196-2 Type 2, ca. 6 m
Type A 30 mA RCCB and DC-RCM, I
C characteristic MCB, rated current according to power supply and Wallbox setting but no more than 32 A
)
cw
)
cc
A0009067408
IEC 61851-1 / 61439-7
230 / 400 V
22 kW
Δn d.c.
Internal RS485 interface (interface for external load management,
no access for users/installation technicians)
16 A
-30 to 50°C
-30 to 85°C
5 to 95% (no condensation)
6/10 kA (C tripping characteristic)
438 x 328 x 170 mm (H x W x D)
≤ 2,000 m AMSL (above mean sea level)
ca. 8.5 kg
ca. 10 kg
A0009067508
for supply cable sizes of up to 3 x 16 mm²
230 V
32 A, single phase
50 Hz
7.2 kW
electronic DC fault current detection ≥ 6 mA
32 A
TN-S
I
III
3
4 kV
4 kV
6 kA
5 kA
1.0
IP 55
IK08