Table of Contents
Advertisement
Charging procedure
The mechanical and electrical installation of the Mercedes-Benz Wallbox Home model variants described in this manual must
always be carried out by qualified specialist personnel: The preparation of and electrical connection to your domestic power
supply in particular must be carried out by a specialist electrical contractor, and subsequently inspected and approved as part
of the process of taking the device into operation. Please contact a specialist electrical contractor or your local Mercedes-
Benz partner, who will be pleased to assist you with any questions regarding the installation and operation of your Wallbox.
The installation itself is described in a separate installation manual. That manual contains important information regarding
mechanical and electrical installation as well as regarding the subsequent functional inspection, approval and taking into
operation of the Wallbox. It is advisable that you are present when the device is taken into operation for the first time by a
specialist electrical contractor to ensure that you are able to easily carry out charging procedures with your Mercedes-Benz
Wallbox Home.
The current operating status of the Wallbox is indicated by a multi-colored LED display in the lower part of the housing cover.
Unless a malfunction is occurring, during operation the LED may ...
You can find further information about operating states on the following pages. You can find further information about error
states in chapter "Resolving errors" on page 8.
Charging procedure using the Mercedes-Benz
Wallbox Home
The Wallbox is engineered for the fastest possible charging procedure of your Mercedes-Benz vehicle according to IEC 61851-
1, Mode 3. Actual charging time depends on the vehicle to be charged and its remaining level of charge.
The Mercedes-Benz Wallbox Home is available in model variants with fixed Type 2 charging cable and different charging
outputs. When not in use, the charging plug is secured in the charging plug storage holder on the right side of the Wallbox
housing and is only removed for the charging procedure.
CAUTION!
The Mercedes-Benz Wallbox Home must only be operated with the housing cover locked: Before charging, ensure that the
housing cover is installed and locked using the key provided.
Please follow these steps to charge your Mercedes-Benz vehicle using the Wallbox:
1. Park your vehicle so that the vehicle charging socket can be easily reached with the charging plug of the charging cable:
The charging cable must not be stretched tight or strained during the charging procedure.
2. Open the vehicle charging socket as described in the vehicle's operating manual.
3. Check the LED display at the front of the Wallbox: When the Wallbox is
ready for operation, the LED located in the lower part of the housing
cover will pulsate blue.
The vehicle may now be connected.
6
... glow green or yellow
... cyclically pulsate green or blue
Hide quick links:
Advertisement
Table of Contents
