Embroidery - Kenmore 385. 17526 Owner's Manual

o Embroidery
f
Set the Machine
Stitch width
Top thread tension Stitch length conirot
control 2 to 6 any number (not
necessary _o adiust)
No presser _'_1 1j.ii
foot
Strelch Stitch
Drop Feed lever
°
g.
Drop the teed dogs (see page 3__5_).
Remove toot holder (see page 1_.
Adjust the stitch width as desired
(see page 2_A).
Draw the design on to the fabric with
taiior's chalk.
Stretch the fabric between embroidery
hoops and place under the needle.
Lower the presser toot lever to engaged
the thread tension.
Holding the top thread in your left hand,
rotate the hand wheel toward you one
complete turn.
Pull the top thread to draw bobbin
thread through to the sudace ot the
fabric.
Using a medium speed, stitch along the
marked outline, guiding the labric
caretully by hand.
When finished embrodiering, raise the
feed dogs (see page 3_..5.).
An embroidery foot is an o ptional item
for a!t models. Available at many sears
stores.
SECTION
3. LEARN THE STITCHES
39