Go to the Application Licensing tab.
Install the credit key in an available USB port.
Click Load to view available credits.
NOTE: This screen shows the licensing status of the G4 meter/controller as well as the available credits on the
credit key. The left pane shows the type and amount of the available credits on the credit key. The upper-right
pane is for information only. It shows the various applications available and the type and amount of credit
necessary to run the application. The standard credits (and four general credits) come with the purchase of the
G4 unit. The lower-right pane displays the licensing status of the G4 unit. It shows what credits are in the
machine, what credits are being used, and any surplus or deficit of credits. A surplus of credits is highlighted in
green. A deficit of credits is highlighted in red.
Select Transfer to Device, located in the center of the screen (Figure 61).
Directly below, select the type of credit using the drop down menu.
Below that, select the number of credits to transfer.
Click Transfer.
Transferred credits should now appear on the lower right-hand side (Figure 62).
Figure 61: Transfer to Device: type and amount
XSeriesG4 Remote Controller User's manual 2103334 Rev. AB | 63
3 XRCG4 startup