(2.83")
(7.188 cm)
Wall mount installation
If installing to a wall near the meter run or inside a meter shed, use this procedure. Before beginning, review the procedure and
the materials required for installation. Refer to the outline drawing for mounting dimension requirements.
Optionally supplied materials
–
Two U-bolts with fastening hardware
–
Enclosure mounting brackets
Customer-supplied materials
–
Four 1/4" machine bolts
–
#10 screws
NOTE: If the XRC
weight of the unit.
There should be no obstruction(s) that would prevent the XRC
installed components or to interfere with installation of the solar panel or other charging power sources.
Step-by-step instructions
See Figure 31 through Figure 33 Outline Drawings.
4 X 0.437"
G4
XRC
C L
Figure 30: Model XRC
G4
is to be wall-mounted, the wall itself should have sufficient strength to support the hanging
16.82"
42.72 cm
2" Pipe
(2.03" O.D.)
G4
6890, pipe-mounted
G4
door from being opened to access interior
XSeriesG4 Remote Controller User's manual 2103334 Rev. AB | 29
2 Installation
0.6"
1.524 cm
31.20"
79.25 cm
30.00"
76.2 cm
C L