2.83"
7.188 cm
Battery pack installation
A battery pack provides the XRC
inspect power cables where they terminate on the battery pack and the connectors for breakage.
The battery pack is mounted behind the removable metal battery plate cover. The plate is adjustable for various sized batteries.
Step-by-step instructions
Insert the battery pack into the battery compartment with its long dimension facing outward.
Connect the battery pack connector to the digital board battery connection J16 connector (Figure 34), located in upper
right corner of the board.
Observe the LCD; the display should be on and scrolling through the startup diagnostics sequence.
4 X 0.437"
G4
XRC
Figure 33: Model XRC
G4
with its operating power. The battery is packed and shipped separately. Before installation,
16.26"
41.30 cm
G4
6890 wall-mounted
XSeriesG4 Remote Controller User's manual 2103334 Rev. AB | 31
2 Installation
0.6"
1.524 cm
31.20"
79.248 cm
30.00"
76.2 cm
0.75"
1.905 cm