Advertisement
Answering machine
Overview of the answer machine base
Delete
Answering machine
Volume Up
On / O
Volume Down
Bluetooth 1 LED
1
Bluetooth 2 LED
2
Play / Stop
Skip back
Skip forward
Page
USB
Socket
Answering machine key illumination
Answering machine On / Off - illuminates at all times.
Play - illuminates when the answering machine is on / flashes when there
are new messages.
Other answering machine keys - illuminates when the answering machine
is being accessed.
Bluetooth LED - illuminates when the corresponding mobile is connected.
Navigating the menu
Your IT.6T has an easy to use menu system on the handset.
Each menu has a list of options, which you can see on the menu map on
the following page.
When the handset is switched on and in standby:
1. Press the left softkey Menu. The main menu is opened.
2. Then use
button to scroll up / down / left / right through the
menu.
3. Soft key options
OK
and
Back
are displayed.
Press the left softkey
OK
to open a sub-menu or validate an option.
Press the right softkey option
Back
to go back to the previous menu
level, correct a character or cancel an action.
r
• If the outgoing line is set to
ECO PLUS
manual, press
and scroll
When ECO PLUS is activated and
to the line you want to dial out
r
the unit has been idle for 1 minute
from.
the transmitted power between
the handset and the base will stop,
• Press
to dial.
an incoming call or pressing any
key will activate the unit and it will
Add a Call block number
revert back to the normal mode.
• Press Menu, scroll to
Call block
and
This feature is set to
Off
by default.
press OK.
To turn ECO PLUS
On
or Off:
• If there are already blocked
• Press Menu, scroll to
Settings
numbers, the first entry is
press OK.
highlighted.
• Scroll to
ECO PLUS
and press OK.
• Press Options,
Add Entry
is
highlighted, press OK.
• Scroll to
Off
or
On
and press OK.
• Using the keypad enter the
NOTE
number you want to block and
When ECO and ECO PLUS are set
press OK.
to ON, the handset range will be
reduced.
ECO
Your IT.6T offers an ECO mode
function which reduces the
transmitted power and energy
consumption when switched on.
This feature is set to
Off
by default.
To turn ECO mode
On
or Off:
• Press Menu, scroll to
Settings
and
press OK.
•
ECO
is highlighted, press OK.
• Scroll to
Off
or
On
and press OK.
Bluetooth
Your IT.6T can store up to 8 mobile
the same Bluetooth profile.
phones via Bluetooth wireless
The IT.6T base has a USB socket
1
technology
but can only be
(USB cable not provided) to charge
connected to two mobiles at a
your mobile phone while taking
time.
mobile calls on the IT.6T handset.
The IT.6T will automatically
This helps to ensure the mobile is
reconnect with a stored device
within the 10 metre range of the
when within range, unless 2
IT.6T base.
devices are already connected.
Pair your IT.6T with your mobile
If you have 8 devices already stored
You will need to pair your IT.6T with
you will need to delete a device
your mobile phone before you can
from the devices list before pairing
take advantage of the Bluetooth
another, see below, "Manage your
features.
devices".
• Press Menu, scroll to
Once your mobile and IT.6T are
press OK.
connected you can:
• Make or receive calls over the
• Scroll to
fixed line or mobile network
• Turn on your mobile phone's
from your cordless handset.
Bluetooth function.
• When receiving a call the cordless
• Place the mobile close to
handset will show Caller ID from the
the IT.6T base and search for
mobile phone.
devices.
• Synchronise your mobile
• The IT.6T will show as Motorola
phonebook to your cordless
IT.6 on your mobile.
handset.
• Enter the Bluetooth PIN on the
Bluetooth ® wireless technology
1
mobile phone if necessary and
provides a wireless connection
follow the mobile's instructions
of up to 10 metres between the
to pair and connect to the IT.6T.
Motorola IT.6T series and other
Bluetooth compatible mobile
• Once connect the
phones. This device supports the
handset display shows
hands-free profiles. In order for
or
Bluetooth devices to communicate
device connected and the
with one another, they must utilize
Help
For more solutions, see the full Help section in the main user guide.
No dial tone
• Use only the telephone line cord supplied.
• Check that the telephone line cord is connected properly.
• Check that the mains power is connected properly and switched on.
No display
• Check that the handset is switched on. Press and hold
• Reset the base by disconnecting the mains power. Wait for around 15
and
seconds before connecting it again. Allow up to one minute for the
handset and base to synchronize.
icon only shows 1 bar and handset beeps
• Handset is out of range. Move closer to the base.
• Make sure that the handset is registered to the base.
• Check that the mains power is connected properly and switched on.
My phonebook will not copy from my mobile phone
• Make sure the IT.6T and your mobile are paired.
The IT.6T does not show in my mobile's device list
• Unplug the IT.6T base from the power and plug back in again.
• Turn the Bluetooth function on the mobile off and on and try again.
• If the problem persists reset the IT.6T to its default settings.
I cannot make / receive calls on the IT.6T via the mobile network
• Make sure your mobile is paired and says "Connected".
• Turn the Bluetooth function on the mobile off and on and try again.
• Check the signal on the mobile phone.
corresponding LED on the base
will light up.
Sync or update the phonebook
from a mobile
• Press UP or press
is highlighted, press OK.
[
• Scroll to the phonebook list you
want, either
or
• If the phonebook is empty
press
Update
and the mobile
phonebook will start
downloading.
Bluetooth
and
• If the mobile phonebook is
already downloaded, press
Find
and press OK.
Options
and scroll to
press OK.
• The phonebook will be updated.
Manage the mobile phonebook
privacy settings
Once your mobile phonebook is
synced with the IT.6T you can set
the mobile phonebook to different
privacy settings.
• Press Menu, scroll to
and press OK.
• Scroll to the mobile you want to
!
set and press OK.
:
depending on the
icon is not scrolling during charge
• Adjust the handset slightly on the base.
• Clean the charging contacts with a cloth moistened with alcohol.
• The battery is full. When the handset is fully charged,
appear steady on the display.
e
Cannot register a handset to the base
• You can register up to a maximum of 5 handsets to a IT.6T base. You
.
must de-register a handset in order to register a new one.
• Check that you have entered the correct PIN code (default = 0000).
• Check that you are at least one metre away from other electrical
equipment to avoid interference when registering.
Answering machine will not record new messages
• Is the recording memory full? Play and delete messages.
• Is the OGM set to Answer Only? Change the OGM to Answer & Record.
• Enter the PIN code and press
OK.
• You can select one of the below
options.
Menu, Phonebook
• Off: No PIN is required
to access the mobile
]
phonebook and it will always
be available.
.
•
In
Range: No PIN is required
to access the mobile
phonebook and it will be
available only when the
mobile phone is connected.
• PIN: Follow the instructions
to set and activate your PIN.
Once activated although the
Update
and
phonebook will always be
available a PIN is required to
access the phonebook.
Mobile Settings
icon will
Using the phone
r
Make a call
Change the ringer melody
• Press
.
Home
is highlighted.
• Press Menu, scroll to
Sounds
press OK.
• Scroll to the line you want to use
and press OK.
• Scroll to
Ringtone
and press OK.
• When you hear the dial tone, dial
• Scroll to the line you want (Home
the number.
/ Mobile 1 / Mobile 2) and press
OK.
• Preparatory dialling
• Scroll to the ringtone you want
• Dial the number first. If you make
and press OK.
a mistake press
Clear
to delete
P
the last digit.
Add an entry to the phonebook
r
/
\
• Press UP or press
Menu
and scroll
• Scroll to
,
or
.
to
Phonebook
and press OK.
• Press
to dial.
• The first entry in the phonebook
r
is highlighted.
Answer a call
• When the phone rings, press
• Press Options,
Add Entry
is
.
highlighted, press OK.
e
End a call
•
First Name
is highlighted, press
OK, enter the name and press
• Press
.
OK.
Redial last number
• Scroll to
Last Name,
press OK,
• Press
Redial
to open the Redial
enter the name and press OK.
list.
• Scroll to the number category
• The last number dialled is
r
you want to store the number
highlighted.
under, either Home,
Office,
Mobile
and press OK.
• Press
and scroll to the line
you want to dial out from and
• Enter the number and press OK,
press OK.
press
Save
and the entry is stored.
Warranty Information
Please refer to the main user guide
.
Manufactured, distributed or sold by Suncorp
Technologies Ltd., official licensee for this product.
MOTOROLA and the Stylized M Logo are trademarks or
registered trademarks of Motorola Trademark Holdings,
LLC. and are used under license. The Bluetooth
trademarks are owned by their proprietor and used
by Suncorp Technologies Ltd. under license. All other
trademarks are the property of their respective owners.
© 2015 Motorola Mobility LLC. All rights reserved.
Version 7 (UK)
and
or
Advertisement
