Evolution Digital
Site Code
•
In addition to setting the parameters listed above, the headend will assign the DTA to a VCT ID. The DTA will
transition to Normal Operations mode once it has received the headend messaging to configure and activate the
DTA and the DTA has fully downloaded and loaded the virtual channel map. Section 2.4.2.1 discusses how the
DTA transitions to Normal Operations. Figure 8 below shows an example of the DTA Status screen when the DTA
is in Normal Operations mode.
2.4.2.1 Transition to Normal Operations
Table 6 below details the condition that must be met in order for the DTA to transition to Normal Operations Mode
and the combination of states and conditions that keep the DTA in Pending Initialization Mode.
DTA State
Normal Operations
Any nonzero value
EVO-SUP-DMS2002HD-U-001-v1r0
Figure 8 DTA Status Screen – Normal Operations
Table 6 DTA Transition to Normal Operations
Timeout Value
Timeout Counter
Parameter
Nonzero
Activated Flag
Site Error Count
Yes
Max LocID >
Current LocID
Page 22