Table of Contents
Advertisement
Evolution Digital
Last Command
Signal Strength
Link Quality
Battery Level
Instruction Screen Visible
Line of Sight
Just Booted
Empty Pairing Table
EVO-SUP-DMS2002HD-U-001-v1r0
The hex value of the last remote control
command received by the DTA.
The RF signal strength (in dBm) between
the DTA and the remote control. It can
take the following values:
Poor (< -85 dBm)
Average (> -85 dBm and < -75 dBm)
Good (> -75 dBm)
The link quality between the DTA and
the remote control. It can take the
following values:
Poor (< 80)
Average (< 80 and > 140)
Good (> 140)
The voltage level reported by the remote
control battery.
(True or False) indicates whether the RF
pairing instruction screen is visible.
(Yes or No) indicates if a remote control
is in sight of the DTA.
This value is set to Yes when the DTA
was booted within the last 30 minutes.
After 30 minutes the flag is set to No.
Set to Yes if there is a problem pairing
Page 71
Hide quick links:
Advertisement
Table of Contents
