Evolution Digital
6.7
Current Channel Status
The Current Channel Status screen provides information about the currently tuned to service. This screen is only
useful if the DTA is in Normal Operations and decoding A/V on a service. Note that while viewing the Current
Channel Status screen you can change channels using the CH up/down buttons or by direct channel entry. This will
allow you to see information for any channel in your lineup. Table 17 defines the parameters displayed in the
Current Channel Status screen.
Current VC
Tuned Frequency
EVO-SUP-DMS2002HD-U-001-v1r0
Figure 34 Diagnostic Menu – Tuner Status
Table 17 Current Channel Status Screen Parameters
Parameter
Indicates the virtual channel (VC) of the
currently viewed channel. Decimal
value.
Indicates the frequency the DTA is
currently tuned to.
Description
Page 56