Mode Transitions; Pending Initialization Mode; Figure 6 Hunt Mode On-Screen Message - Extended Scan - Evolution Digital HD uDTA User Manual

Evolution Digital
After completing two iterations through the progress bar (reaching 100% two times) and failing to lock onto a QAM
and detect a CAT PID with a valid CA system ID, the DTA will display the on-screen message shown in Figure 6.
Figure 6 Hunt Mode On-Screen Message – Extended Scan
While this message is displayed, the DTA will continue to cycle through the frequency list. In the event the
extended hunt mode exceeds five (5) minutes, the DTA will remove the OSD and display a screen saver to prevent
plasma screen burn-in.

2.3.3 Mode Transitions

The DTA will transition from Hunt Mode to Pending Initialization Mode as described in this section.
2.4

Pending Initialization Mode

The DTA enters Pending Initialization Mode (also known as Pending Init) from Hunt, Normal Operations or
Common Download Modes; please see these respective sections for more details about how the DTA enters Pending
Init Mode. In Pending Init Mode, the DTA is checking CA system parameters, monitoring the In-band messaging,
and waiting for proper activation. Once all conditions are met, the DTA will enter Normal Operations Mode. Table
5 details the properties of Pending Initialization Mode.
EVO-SUP-DMS2002HD-U-001-v1r0 Page 19