Evolution Digital
1.
Hold the 7 button until the Diagnostic screen appears.
2.
Press the Info button to access the hidden Test Menu
3.
The only option available in the Test Menu is Reset to Factory Defaults so just press the OK button and the
box will be cleared and reset.
After the last step, the DTA will clear its NVRAM to the default state and reset itself, entering Boot Mode then Hunt
Mode (if it successfully exits Boot Mode). Figure 43 shows an example of the hidden Test Menu as presented on
the DTA.
This manual clear process can be used while in the any of the following modes:
Hunt
•
Pending Initialization
•
Normal Operations
•
Code Download
•
EVO-SUP-DMS2002HD-U-001-v1r0
Figure 46 Test Menu
Page 74