Copying Program(S) To The Sd Card - Pfaff 3819 series Instruction Manual

Production
10 Copying program to the SD card
.10.04 (s)
COPY >>
0 00
Fig. 10 - 13
The machine switches from the machine memory to the SD card to enter the copy function
after pressing the +/- key under the Enter symbol .
>>
COPY 01 02
0 00
Fig. 10 - 14
The program numbers of the program that you want to copy in the machine memory and
on the SD card can be selected with the +/- buttons under the values.
The MD machine data can only be copied to the machine data fi le.
If the complete machine contents ALL are selected, all programs are copied to the SD card.
If a program is already present on the SD card, a prompt for confi rmation will be displayed.
The right + key confi rms that the data will be overwritten. The right – key cancels the over-
writing process.
43