Table of Contents
Advertisement
VX.XXX-serial number
OK
3.2.1.9 +GOI - Request Global Object Identification
This command causes the modem to transmit one or more lines of information text
identifying the device, based on the ISO system for registering unique object identifiers.
Typically, the text consists of a single line containing numeric strings delimited by period
characters. The general format of object identifiers is defined in Section 28 of ITU-T
Recommendation X.208; the encoding rules are defined in ITU-T Recommendation
X.209.
Syntax
+GOI
Typical Response
TBD
OK
3.2.1.10 +GCAP - Request Complete Capabilities List
This extended-format command causes the modem to transmit one or more lines of
information text listing additional capabilities command +<name>s , which is intended to
permit the user to identify the overall capabilities of the modem. In particular, if the
modem implements a particular modem control standard that uses Extended Syntax
Commands, and if that modem control standard includes command(s) that indicate
general capabilities, the +<names>(s) of those commands will be reported to the modem
in response to a +GCAP command.
Syntax
+GCAP
Example Responses
+GCAP: +FCLASS, +MS, +ES, +DS, for a data modem that supports all capabilities
listed
Where:
+FCLASS T.class1, +F (Class 1 Facsimile modem Control)
+MS +M commands (Modulation Control: +MS and +MR commands)
+ES +E commands (Error Control: +ES, +EB, +ER, +EFCS, +ETBM)
+DS +D commands (Data Compression: +DS and +DR)
Advertisement
Table of Contents
