Schwinn NAUTILUS A10 User Manual page 13

Leveling Leveling Y Y Y our Leveling our our Bike Bike Bike
The levelers are the polygonal end caps on the Rear Stabilizer. Turn the end cap to adjust the level. Make sure the bike is level and stable before you exercise.
Moving Y Y Y our Moving Moving our Bike our Bike Bike
Upright Upright Upright
To move the upright bike, carefully pull the Handlebars toward you while pushing
the front of the bike downward. Push the bike to the desired location.
NOTICE: Be careful when you move the bike. All abrupt motions can affect the computer operation.
T T T roubleshooting roubleshooting
roubleshooting
Problem Problem Problem
No display/partial display/unit will not turn on
Check Check Check
If bike has AC adapter, check electrical (wall) outlet
If bike has AC adapter, check connection at unit
If bike has batteries, check Battery Indicator on console
or check batteries.
Check data cable integrity
Check data cable connections/orientation
Check console display for damage
13 13 13
Recumbent Recumbent Recumbent
To move the recumbent bike, carefully lift the rear end of the bike and
slowly push the bike to the desired location.
Make sure unit is plugged into a functioning wall
outlet.
Connection should be secure and undamaged. Replace
adapter or connection at unit if either are damaged.
Replace the batteries. It may be necessary to replace
the batteries although the Battery Indicator is not on.
All wires in cable should be intact. If any are visibly
crimped or cut, replace cable.
Make sure cable is connected securely and oriented
properly. Small latch on connector should line up and
snap into place.
Check for visual sign that console display is cracked or
otherwise damaged. Replace Console if damaged.
Solution Solution Solution